Tunnel Type Full Sealing Nitrogen Filled Wave Soldering Equipment PERFECTFLOW Series

PERFECTFLOW series is a tunnel type full sealing nitrogen filled wave soldering system. It adopts the world's first sealing solution for welding zone and the innovative segmented conveying solution, which perfectly meets the requirements of flexible welding process angle and enlarges the bottom space of boards, which solves the jamming, inconvenience in operation and maintenance problems of segmented conveyor in common wave soldering machine. It can extremely play the application effect of the nitrogen protection process of wave soldering, and greatly improve the performance of tunnel type wave soldering equipment and welding process quality.

Feature:

• Conveyor system: adopts the segmented floating structure to effectively prevent the deformation of guide rail; innovative segmented conveying system, smoother conveying; the space of the bottom side of the board can be flexibly configured.
• Preheating system: adopts the drawer type module energy-saving design, infrared and hot air convection heating can be combined as required, PID temperature control mode, with infrared heat compensation between the preheating zones and soldering unit which effectively reduce temperature loss.
• Soldering system: The solder pot is heated by external heat, the inner liner of the solder pot is made of cast iron, and treated with anti-corrosion; the solder pot is sealed with special elastic material and equipped with electric mode solder pot, which can be lifted, moved up and down freely.
• Nitrogen filled system: the world's first sealing solution for welding zone,Flexible welding process angle; equipped with oxygen separator for monitoring the remaining oxygen
• PC+PLC control system, Windows 10 operation system, Chinese/English operation interface, process profile/data automatic storage function, over or under level of flux liquid alarm, low tin level alarm.

Application range:

Wave soldering equipment is used to solder through-hole components and circuit boards through high-temperature liquid solder waves on printed boards with pre installed plug-in components. Wave soldering is widely used in the electronic product manufacturing industry, including consumer electronics, communication equipment, household appliances, power supplies, automotive electronics, medical equipment, industrial automation, energy and other industries

Overall diagram:

Integrated spray fluxer unit (selective spray device is optional)
The welding process angle of rails is flexible and adjustable
The bottom space can be flexibly configured according to requirements
Equipped with oxygen separator for monitor remaining oxygen
Transparent glass viewing window
Solder pot is motorized in/out/up/down

Product Parameters:

Notices:

1.Power requirements:

①Three phase five wire: voltage 380V, frequency 50/60HZ;

②The wire diameter requirement is 16mm², with a leakage protection switch of 125A and a leakage capacity of 150-200mA.

2.The ground is required to withstand a pressure of 1000kg/m².

3.External air exhaust requirements:

①Spray: air duct Ø250mm, exhaust air volume 30M³/min;

②The exhaust air volume for the tin furnace outlet Ø250 and the tail cover outlet Ø150 is about 15M³/min.

Founded in Hong Kong in 1984, Suneast technology established its industrial park in Shenzhen in 1999 and listed on the main board of Hong Kong stock exchange in 2000 (Stock Code: 0365. HK).The independent R&D products, like reflow oven, wave soldering machine, selective soldering machine, vertical oven, printer and etc has always maintained a leading position in technology, and provided professional electronic equipment solutions for many well-known enterprises at home and abroad.

With modern industrial parks and advanced R&D facilities, Suneast technology has strong system integration capabilities in R&D, design, production, automation and information equipment manufacturing. Its sales network is all over the world. Suneast technology has been achieved technical strategic cooperation with Tsinghua University, Chinese University of Hong Kong, Hong Kong University of Science and Technology and Harbin Institute of Technology, and its R&D capabilities has reached the advanced level at home and abroad.

In the core area of Guangdong-Hong Kong-Macao Greater Bay Area, Suneast technology has served semiconductor back-end application customers for more than 40 years, its downstream and end customers include Huawei, ZTE, TCL, Hikvision, MLS LIGHTING, DBG, DESAYSV AUTOMOTIVE, SHENZHEN MTC, JFLED, etc.

The dual drive gantry synchronous follow linear motor technology has been successfully applied to a number of high-speed and high-precision equipment manufacturing and processing fields, and gains great praise by users. The new semiconductor packaging equipment, like chip bonder is the masterpiece of Suneast technology, which helps the development of domestic chip industry. Today, Suneast technology has become the leader of China's intelligent equipment industry.

As the core enterprise of Sino ICT Holdings, Suneast technology will strengthen the strategic goal of the group and become a world-class enterprise in the field of high technology.

Culture

Vision

To be the leader in the global SMT intelligent equipment industry and the champion in the semiconductor equipment sub-industry!

Maintain leading technology level, R&D strength, industrial scale, and management model, and become the leader of the global SMT intelligent equipment industry and the champion of the semiconductor equipment sub-industry!

  Mission